Luminkey60 Pro-Quick Start Guide

LUMINKEY60 PRO-Quick Start Guide

LiuLihui Aug 01, 2024

1.The Power Switch

Pull out the keycap of the right shift and turn on the power switch.

2.Switch To The Right System

It defaults to automatically detecting WIN/MAC systems but can also be manually switched;to manually switch systems,hold down the Fn + M key for 3 seconds.

3.Connection Mode Switching

(For initial device pairing,press and hold the combination key for 3 seconds)

4.Battery Capacity

Under wireless mode, when the detected battery voltage is less than or equal to 3.1V, it will enter shutdown mode; under wired mode or when the battery voltage is greater than or equal to 3.3V,it will operate normally.

Press the Fn + Space key combination to turn off the backlight, and the number keys 1 to 5 will light up to display the remaining battery level. (For example, if keys 1 to 3 are lit, it indicates 60% battery)

5. WIN Lock

Press Fn+Left WIN key for 3 seconds to disable/release the WiN key.

 

6.Factory Reset

Factory reset the keyboard by pressing Fn+ESC(for 3 seconds)

 

相关文章